Dig Function Speed Is Slow During Combined Operation With Swing Diagnostic Procedure –1/1 TM2361 (24JUN08) 9025-15-28 450DLC Excavator Operation and Tests 062608 PN=778 Diagnostic Information 1 DTC Check See Reading Diagnostic Trouble Codes With Monitor Display. (Group 9015-20.) See Reading Diagnostic Trouble Codes With Service ADVISORDiagnostic Application Are any of the following DTC displayed? • 11200.03 See Pump 1 Delivery Pressure Sensor Circuit Voltage High. (Group 9001-10.) • 11200.04 See Pump 1 Delivery Pressure Sensor Circuit Voltage Low. (Group 9001-10.) • 11301.03 See Swing Pilot Pressure Sensor Circuit Voltage High.
(Group 9001-10.) • 11301.04 See Swing Pilot Pressure Sensor Circuit Voltage Low. (Group 9001-10.) • 11410.03 See Pump 1 (4-Spool) Control Solenoid Valve Feedback Current High. (Group 9001-10.) • 11410.04 See Pump 1 (4-Spool) Control Solenoid Valve Feedback Current Low. (Group 9001-10.) • 11994.04 See Pump 1 (4-Spool) Control Pressure Sensor Circuit Voltage High. (Group 9001-10.) • 11994.03 See Pump 1 (4-Spool) Control Pressure Sensor Circuit Voltage Low. (Group 9001-10.) YES: Diagnose and repair as required to clear displayed DTC. Diagnostic procedure complete. NO: Go to Wiring Connector Check.
– – –1/1 2 Wiring Connector Check See System Functional Schematic, Wiring Diagram, and Component Location Master Legend. (Group 9015-10.) Are all the connectors in good condition? YES: Diagnose problem in main controller. See Main Controller (MCF) Diagnostics Using Dr. ZX. (Group 9015-20.).. NO: Repair or replace connectors. – – –1/1 9025 15 28