John Deere 450DLC — Swing Is Too Fast Diagnostic Procedure

TM2361 (24JUN08) 9025-15-35 450DLC Excavator Operation and Tests 062608 PN=785 Diagnostic Information 5 Circuit Relief Valve Check Perform Circuit Relief Valve Test and Adjustment. (Group 9025-25.) Check swing relief pressure. Do circuit relief valves meet test specifications? YES: Go to Swing Motor Case Drain Check. NO: Adjust or repair circuit relief. – – –1/1 6 Swing Motor Case Drain Check Perform Swing Motor Leakage Test. (Group 9025-25.) Check if swing case drain leakage is normal. Does case drain leakage meet specification? YES: Remove and repair motor. NO: Inspect swing reduction gear. See Swing Gearbox Disassemble and Assemble.

(Group 4350.) – – –1/1 7 Control Valve Check See Control Valve Operation. (Group 9025-05.) Inspect control valve for sticking spool. For component location. Does control valve spool move freely? YES: Diagnostic procedure complete. NO: Repair or replace control valve components as necessary. See Control Valve Disassemble and Assemble. (Group 3360.) – – –1/1 9025 15 35 Swing Is Too Fast Diagnostic Procedure – – –1/1 1 DTC Check See Reading Diagnostic Trouble Codes With Monitor Display. (Group 9015-20.) See Reading Diagnostic Trouble Codes With Service ADVISORDiagnostic Application Are any of the following DTC displayed? • 11301.03 See Swing Pilot Pressure Sensor Circuit Voltage High.

(Group 9001-10.) • 11301.04 See Swing Pilot Pressure Sensor Circuit Voltage Low. (Group 9001-10.) YES: Diagnose and repair as required to clear displayed DTC. Diagnostic procedure complete. NO: Go to Swing Pressure Sensor Check. – – –1/1