Tests Turn adjusting screw in to increase pressure setting; turn adjusting screw out to decrease pressure setting. Specification Circuit Relief Valve Adjusting Screw—Pressure Change 5 MPa approximate per 1/4 turn ....................... 5000 kPa approximate per 1/4 turn 50 bar approximate per 1/4 turn 725 psi approximate per 1/4 turn Adjusting Screw-to-Circuit Relief Valve Cartridge Nut—Torque 31.5 ...................................................... 23 lb-ft 8. Check the pressure setting again. 9. Turn second adjusting plug of main relief and power digging valve out to its original pressure setting.
LD30992,0000281 –19–15MAY08–5/5 9025 25 41 TM2361 (24JUN08) 9025-25-41 450DLC Excavator Operation and Tests 062608 PN=901