John Deere 450DLC — Swing Motor Crossover Relief Valve Test and Adjustment

Tests 3. Run machine at specification. Specification Hydraulic Oil—Temperature 45—55 ° C ........................................................ 110—130 ° F Engine—Speed 1300 rpm approximate ...................................................... Work Mode Switch—Position Dig Mode ...................................................... Power Mode Switch—Position HP (High Power) Mode .............................. Auto Idle Switch—Position Off .................................................................... 4. Actuate and stall swing function over relief. Record pressure reading. Repeat for opposite direction.

Specification Swing Motor Crossover Relief Valve—Pressure 28.4—30.4 MPa ............................................................... 28 441—30 400 kPa 284—304 bar 4125—4409 psi 5. Take readings and check to specification. Continued on next page TX04577,00000ED –19–05JUN06–3/4 9025 25 54 TM2361 (24JUN08) 9025-25-54 450DLC Excavator Operation and Tests 062608 PN=914