TM2361 (24JUN08) 9025-25-86 450DLC Excavator Operation and Tests 062608 PN=946 Tests 11. Run engine at specification. Specification Engine—Speed............................................................................ Fast Idle Work Mode Switch—Position...................................................... Dig Mode Power Mode Switch—Position....................................................... P Mode Auto Idle Switch—Position.................................................................... Off 12. Slowly close the loading valve on flowmeter to obtain the specified pressures. Record pump flow rate at each pressure.
Specification Fan Drive Pump—Flow Rate— New......................................................... 61.3 L/min at 7.9 MPa and 1750 rpm 61.3 L/min at 7930 kPa and 1750 rpm 61.3 L/min at 79.3 bar and 1750 rpm 16.2 gpm at 1150 psi and 1750 rpm Fan Drive Pump—Flow Rate— New....................................................... 57.5 L/min at 23.3 MPa and 1750 rpm 57.5 L/min at 23 305 kPa and 1750 rpm 57.5 L/min at 233.1 bar and 1750 rpm 15.2 gpm at 3380 psi and 1750 rpm Fan Drive Pump—Flow Rate— New.......................................................
82.5 L/min at 26.3 MPa and 1750 rpm 82.5 L/min at 26 270 kPa and 1750 rpm 9025 25 86 82.5 L/min at 262.7 bar and 1750 rpm 13.3 gpm at 3810 psi and 1750 rpm Fan Drive Pump—Flow Rate— Minimum Allowable................................. 50.3 L/min at 7.9 MPa and 1750 rpm 50.3 L/min at 7930 kPa and 1750 rpm 50.3 L/min at 79.3 bar and 1750 rpm 13.8 gpm at 1150 psi and 1750 rpm Continued on next page OUT3035,000000D –19–05JUN06–5/6