John Deere 450DLC — Visual Inspection of Components

TM2361 (24JUN08) 9031-25-3 450DLC Excavator Operation and Tests 062608 PN=965 Tests Air Conditioner Compressor Check Inspect compressor. LOOK/FEEL: Is belt properly tensioned on pulley? LOOK/FEEL: Is belt in good condition, NOT frayed, worn, or glazed? LOOK/FEEL: Is belt tensioner in good condition, NOT worn or damaged? LOOK/FEEL: Is compressor pulley in good condition and properly aligned with belt drive pulley on engine? LOOK/FEEL: Are compressor mounting brackets in good condition, and is mounting hardware properly tightened? LOOK/FEEL: Are electrical connections to compressor clean and tight? Is wiring in good condition? YES: Go to next check. NO:

Repair or replace components as necessary. – – –1/1 Condenser Check Inspect condenser core. LOOK/FEEL: Is core free of dirt and debris? LOOK/FEEL: Is core NOT showing signs of leakage, such as dirt, oil, or refrigerant dye? LOOK/FEEL: Are fins of core straight, NOT bent or damaged? YES: Go to next check. NO: Clean and straighten fins. Repair or replace components as necessary. – – –1/1 Engine Fan Check Inspect engine fan. LOOK/FEEL: Are fan blades in good condition, NOT worn, bent, broken, or missing? LOOK/FEEL: Is fan securely installed? YES: Go to next check. NO: Repair or replace components as necessary. – – –1/1 9031 25 3 Heater/Evaporator Core Check Inspect heater / evaporator core.

LOOK/FEEL: Is core free of dirt and debris? LOOK/FEEL: Is core NOT showing signs of leakage, such as dirt, oil, or refrigerant dye? LOOK/FEEL: Are fins of core straight, NOT bent or damaged? LOOK/FEEL: Is condensation drain tube attached and in good condition, NOT kinked, damaged, or clogged? YES: Go to next check. NO: Clean and straighten fins. Repair or replace components as necessary. – – –1/1