OPERATION 5. Approximately five minutes after shutdown, check the engine oil level. If necessary, add oil up to the maximum fill level on the oil dipstick (see Figure 24). Do not overfill. Never attempt to start the Mercedes-Benz MBE 900 engine using ether or any other starting fluid. Serious engine damage could result. NOTICE: 1. Turn on the ignition switch. 2. With the accelerator pedal in the idle position, start the engine. PERSONAL INJURY To avoid injury when working near or on an operating engine, remove loose items of clothing and jewelry. Tie back or contain long hair that could be caught in any moving part causing injury. Figure 24 Oil Dipstick 6.
Check all the mounting fasteners and belts on the engine for tightness. 3. Check the engine for leaks. Checking the Coolant Level (Hot Check) [a] Check all hoses, hose clamps, and pipe unions on the engine for tightness. Shut down the engine and tighten them if necessary. Check coolant level as follows: 1. Allow the engine to run for approximately five minutes at a moderate speed. [b] Check the oil feed and return lines at the turbocharger for tightness. Shut down the engine and tighten them if necessary. 4. Shut down the engine. 34 All information subject to change without notice. (Rev. 04/08) DDC-SVC-MAN-0055 04/08 Copyright © 2008 DETROIT DIESEL CORPORATION