131 GRND SPEED DIRECTION HAND CNTL REF NO. PART NUMBER QTY DESCRIPTION REMARKS FOOTNOTES 1. USE LOCTITE 242 OR EQUIVALENT 2. TORQUE TO 70 IN.-LBS. 3. IF ORDERING THIS PART FOR MACHINE WITH S/N ___________ OR OLDER, YOU MUST ALSO ORDER LEVER (#319-916) AND REFER TO PARTS PAGE "GRD SPEED DIRECTION FOOT CONTROL", IF THIS UNIT IS EQUIPPED WITH CRUISE CONTROL, PART 319-916 IS NOT NEEDED. 4. 196-287 IS FOR HYDROSTAT TRACTORS. USE 194-196 FOR POWER SHIFT TRACTORS. NOTE:
K 806-228 1 110-445 1 KNOB (3/8-NC, ORANGE) 2 319-914 1 RIGHT CONTROL SEE FOOTNOTE 3 AND INCLUDES HARDWARE 3 107-529 1 WASHER UHMW (3/8) 4 116-980 2 SHOCK MOUNT 5 196-287 1 CONTROL CABLE SEE FOOTNOTE 4 6 331-166 2 BOLT-ON BACK-UP (.306") 7 106-048 2 LOCKNUT (#10-24) 8 106-205 2 WASHER (.191") 9 110-318 1 BALL JOINT (#10-32, FM) 10 105-810 2 BOLT (#10-24 X 7/8", SOC) 11 110-697 1 BOLT-ON CLAMP (.360") 12 309-227 1 CONTROL LEVER FRAME 13 107-770 1 LOCKNUT (1/4-NF, NYL INSERT) 14 105-245 1 SCREW (M10-1.50 X 25MM) 15 107-001 4 FLG LK SCREW (M10-1.50 X 25MM) 16 107-769 2 JAM NUT (M10-1.50) SEE FOOTNOTE 2 17 105-832 4 FLG LOCKNUT (1/4-NC) 18 310-127 1 PIVOT PLATE 19 105-284 2 WASHER (3/16") 20 110-348 2 POP RIVET (3/16" X .664") 21 115-598 1 SPRING DETENT 22 106-987 2 FLG LK SCREW (M6-1.00 X 16MM) 23 117-519 1 CONTROL HANDLE 24 315-149 1 DETENT TIP 25 106-271 2 SCREW (M5-0.80 X 8MM, PLPS) SEE FOOTNOTE 1 26 316-476 1 TEMPLATE 27 106-396 1 WASHER (M10, HARDENED) 28 106-261 4 WASHER (.334")