155 HYDRAULIC FILTER RT90 POWERSHIFT REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 111-027 8 T-BOLT CLAMP (1.25" - 1.50") 2. 116-460 AR BULK HOSE (1", SOLD PER 1') 3. 105-003 5 FLG LOCKNUT (5/16-NC) USE 2 @ 75" 5. 194-283 - RADIATOR/OIL COOLER 4. 153-210 1 HYDRAULIC MANIFOLD (5 PORT) 7. 155-230 1 S/O COUPLER (16S-16H45) 8. 149-642 1 HYD OIL FILTER 149-641 1 HYD OIL FILTER ELEMENT SEE FOOTNOTE 1 SEE FOOTNOTE 2 6. 117-764 1 ABRASION SLEEVE (1.59" X 90") 149-854 1 HYD OIL FILTER ELMT (1-3/8 UNF) SEE FOOTNOTE 3 9. 105-827 2 FLG LK BOLT (3/8-NC X 1-1/4") 10. 153-862 1 TEE (16S-08O-16H-08H) 11. 154-324 4 CAP (10OF) 12. 316-850 1 BRACKET 14. 153-957 1 HOSE (10OFX45-44"-3000) 13.
153-984 3 BK RUN TEE (10O-10O-10OL) 153-956 1 HOSE (10OFX90-50"-3000) ENDS WITH S/N 5X0709. BEGINS WITH S/N 5X0710. 15. 154-188 1 S/O COUPLER (16S-16H90) 16. 116-460 AR BULK HOSE (1", SOLD PER 1') 17. 155-231 1 S/O BR TEE (16S-16H-16H) USE 1 @ 22" 19. 110-332 1 BOLT-ON CLAMP (1-5/8") 18. 153-888 1 CHECK VALVE ((16SF-16SF, 25 PSI) 20. 149-821 1 HYD LINE (-10) 21. 153-850 - S/O COUPLER (10S-08H90) 150-2680 AUXILIARY PUMP 22. 153-564 - TANDEM HYDRAULIC PUMP 23. 116-460 AR BULK HOSE (1", SOLD PER 1') 24. 157-313 1 CONNECTOR (16OFX-16H90, XLG) 25. 154-287 1 CONNECTOR (16S-16O90) 26. 155-466 1 HOSE (10OFX90-74"-2750) 27. 116-286 - BULK HOSE (1/2", SOLD PER 1") 28.
157-343 1 HOSE (10OFX90S-120"-3000) 29. 117-392 1 ABRASION SLEEVE (1.25" X 60") USE 1 @ 7.5" 30. 154-319 1 BK RUN TEE (10O) 31. 110-353 2 WORM CLAMP (3/4" TO 1-1/2") 32. 515-618 1 HOSE (10OFX90-95"-3000) 33. 154-391 1 CONNECTOR (08S-10O) 34. 116-636 AR BULK HOSE (3/4", SOLD PER 1') USE 1 @ 30" 35. 158-033 - HYD CONTROL VALVE (3-SPOOL) 159-809 - HYD CONTROL VALVE (3-SPOOL) ENDS WITH S/N________. BEGINS WITH S/N_________. 36. 154-362 1 S/O COUPLER (10S-12H90) 37. 154-327 1 CAP (08OF) 38. 515-515 1 HOSE (10OFX45-50"-3000) 39. 107-336 2 FLG SCREW (M16-2.00 X 45mm, 10.9) 40. 106-442 2 FLG LOCKNUT (M16-2.00, PRV TRQ) 41. 117-611 1 ABRASION SLEEVE (1.00" X 22") 42.
149-908 1 RUN TEE (16S-16H-16H) 43. 110-333 2 BOLT-ON CLAMP (1") 44. 117-691 1 ABRASION SLEEVE (1.25" X 68") 46. 320-253 1 TAB 47. 105-152 1 NUT (1/4-NF) SEE FOOTNOTE 4 SEE FOOTNOTE 4 45. 117-214 1 ABRASION SLEEVE (1.25" X 40") FOOTNOTES: 2. AFTER 50 HOURS CHANGE TO FILTER ELEMENT 149-641 WHICH IS THE REGULAR SERVICE FILTER. 3. HOWEVER IF THE HYDRAULIC SYSTEM IS EVER EXPOSED TO CONTAMINATES THE BREAK-IN FILTER (149-854) SHOULD BE RE-INSTALLED FOR AT LEAST 50 HOURS OF OPERATION. 1. 149-642 (HYD. OIL FILTER) IS THE FILTER HEAD AND ELEMENT (149-854) IS A BREAK-IN FILTER. 4. REF. #46 (320-253) BOLTS TO T-BOLT CLAMP (111-027) AND SUPPORTS ELECTRICAL HARNESS CONNNECTOR.
04 ID0153665 REFER TO O-RING CHART (800-301) IN BACK OF THE BOOK FOR REPLACEMENT OF O-RINGS.