OPERATING INSTRUCTIONS FOR STARTING THE ENGINE pulling the dipstick out of the guide tube. through the guide tube and let the oil level settle in the oil pan. 6. Use a shop rag to wipe off the end of the dipstick. 8. Reinstall the dipstick and make sure it is fully inserted into the guide tube. 7. Wait 15 seconds to allow any crankcase pressure to dissipate 9. Figure 14 Oil Dipstick 9. Remove the dipstick and read the oil level dipstick . See Figure 14. The figure shows a comparison between the bends on the dipstick and a crosshatch pattern on a conventional dipstick. Note the exact area noted on the bends. For example, the “maximum” oil level will be at the BOTTOM of that bend.
For the “minimum” oil level, it is noted at the TOP of the bend. 10. Figure 15 Oil Fill Cap If the oil level is below the “minimum” bend, add oil to bring it up the “maximum” level . Do 34 All information subject to change without notice. (Rev. 04/08) DDC-SVC-MAN-0040 0704 Copyright © 2008 DETROIT DIESEL CORPORATION