. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING CAUTION usual, check for 3 - 94 Do not open the radi ator cap unless necessary. Wh en checkin g the coolant, always wait for th e engine to cool down and check the sub tank. Immediately after th e engine is stopped , the coola nt is at a hi gh temperature and the radiato r is under high in ternal pre ssure. If the cap is remove d to check the cool ant level in this condition, t here is a hazard of burns . Wait for the te mperatur e to go down, then turn the cap slowly to releas e the pres sure and re move it When adding coolant, use the step and ha ndrail prov ided. Supp ort your body 1.
Open side door (1) of the engine h ood on th e right si de of machine. 2. Look through ins pection window ( A) and ch eck that t level is in the ra nge between FUL L and LO W on sub tank If the water level is low, open cove r (3) and add water the filler port of s ub tank (2) until it reaches the FULL level 3. After adding coo lant, tighten the c ap secure 4. If sub tank (2) is empty, check fo r leaks, th level in the radia tor. If the coolant level is lo the radiator, the n add coolant to s ub tank (2 If the volume of coolant added is more tha e. re is no oil in the coolant. possible leakag Confirm that the re is no oil in the c