. OPERATION OPERATION ADJUSTMENT SEAT ADJUSTMENT WARNING 3 - 98 Whe n adjusting the position of the o perator's seat, always set the work equipment l ock lever to the LOC K position to preven t any accidental contact with the control l evers. A lways adjust the operator's s eat before starting each operation or whe n the operators c hange shift. W hen adjusting the seat, put y our back against the backrest and adjust to a position wher e the brake peda l can b e fully depressed. DELUXE SUSPENSION SEAT (A) Fore-and-aft adjustment (A) Pull lever (1) up, set the seat to t he desired position, then release the l ever. m (6.3 in) (0.6 in) x 10 stages) Fore-and-aft adjustment:
160 m (16 mm n on the rear of the seat to tilt it Mov e lever (2) down and push d own on the front of the seat to tilt it forward. Front tilt, rear tilt: 4 stages each) Adjustment range: 13 degrees ( Front tilt, rear tilt: 4 stages eac (C) Setting seat for operator's w Turn grip (3) to adjust the streng Adjustment range: (Target) 50 to (D) Adjusting backrest angle Mov e lever (4) up and move the Adjustment range: Front 66 degr Rear 72 degr NOT ICE If the backrest is reclined too far, the backrest may hit the rear glass, so use it in a position where it do es not contact the g lass. Whe n reclining the seat fully to take a rest, set the seat in the followin F ore-and-aft adjustment: Max.
fro U p-down adjustment: Max. height S eat angle adjustment: Horizonta R eclining adjustment: Fully tilted backward 36 degrees (12 stages)