MACHINE OPERATIONS AND CONTROLS NOTE When the engine is started, the travel speed is automatically set to low speed. When traveling at high speed, if the machine travels on soft ground or up a slope and the load increases, the travel is automatically switched to low speed travel, so there is no need to operate the switch. The travel speed boost monitor displays stays lighted up. When the load is reduced, the travel system returns to high speed travel. 5. Check that the travel alarm sounds. If the alarm dose not sounds, please contact your Komatsu Dealer for repairs. 3.3.4.4 STOPPING MACHINE Avoid stopping suddenly. Give yourself ample room when stopping. 1.
Put the left and right travel levers (1) in the NEUTRAL po- sition, then stop the machine. 112 WARNING