DETAILED CONTROLS AND GAUGES 2. - 3. Work Equipment Control Lever A: Canopy specification B: Cab specification This left work equipment control lever (2) is used to operate the arm and upper structure. Swing operation (a) Swing to right (b) Swing to left Arm operation (c) Arm IN (d) Arm OUT N (Neutral): The upper structure and arm are held in that posi- tion when they come to a stop and do not move. This right work equipment control lever(3) is used to operate the arm and upper structure. Boom operation (e) RAISE (f) LOWER Bucket operation (g) DUMP (h) CURL N (Neutral): The boom and bucket are held in that position when they come to a stop and do not move. 69