DETAILED CONTROLS AND GAUGES 3.2.10 COOLING COVER When carrying out inspection and maintenance inside the cooling cover, open the engine rear cover, then open the cooling cover. Always open the engine rear cover fully to a point where it is held in position by the rod. Always secure the cooling cover in position with the rod. 1. Open engine rear cover (1) until it is secured in position. (For details, see Section "3.2.9 ENGINE REAR COVER") 2. Pull cover opening lever (2) and open cooling cover (3). 3. Pull engine rear cover (3) and open it fully. Cover (3) is secured in position by rod (4). 4. When closing engine rear cover (3), lift up rod (4) and clo- se cover (3) slightly.
When the rod comes out from the groove, close the cover. Push cover (3) in to lock it. 5. Close the engine rear cover (1). For further details, see "3.2.9 ENGINE REAR COVER". 6. Lock the cover. 82 CAUTION