WEICHAI & PSI SERVICE MANUALS AVAILABLE ONLINE AT FLYPARTSGUY.COM Weichai America Corp. For 6-cylinder engine, 14 M14 10.9 main bearing bolts are used to fix the bearings. As shown in Fig. 4-3, start with middle bearings, do the tightening work from middle to two ends evenly, follow the procedures below: Firstly pre-tighten each bolt to 70Nm, and tighten the bolts for further 90°±4°. Fig.12- 3 Tighten order of main bearing bolt Key point 2: Assembling: Install the thrust bearing cap on rear end of engine block, and the others are non-thrust bearing cap. Take the cap two ends as locating basis when assembling; the main bearing bolts cannot be screwed on if the cap is inversely placed.
Revision: August 2019 77 GET YOUR WEICHAI & AFTERMARKET SERVICE PARTS AT FLYPARTSGUY.COM