D 2008/2009 Cylinder head W 01-02-02 Installing the rocker arm z Grease the rocker arm (arrow) lightly. 1 z Mount rocker arm (3) and rocker arm bearing (2). Align rocker arm centred to the valve spring! 2 z Fasten screw (1). 3 6 © 41002-1 z Press down rocker arm (1) and pushrod. z Tighten screw (2). 27 Nm Oil rocker arm lightly! 2 1 © 41004-1 z Clean sealing surfaces. The sealing surfaces must be dry and free from grease and dirt. z Mount new gasket (4). z Mount cylinder head cover (3). 2 z Fit on the venting hose (1). 1 z Tighten screws (2). 3 27 Nm 4 Tightening sequence: From the centre out- wards. z Tighten hose clip (1). © 41001-2 02/2006 5991-001 2/2