D 2008/2009 Drive system W 02-02-04 Installing the crankshaft sealing ring Use new crankshaft sealing ring. The sealing lip faces the crankcase. z Oil the sealing lip of the crankshaft sealing ring light- ly. z Place the crankshaft sealing ring on the assembly tool. z Mount the assembly tool on the crankcase pin. z Drive in crankshaft sealing ring to the stop with the assembly tool. The installation depth is determined by the assembly tool. 6 z Remove assembly tool. z Install V-belt pulley. © 41055-0 W 12-02-02 © 02/2006 6000-001 2/2