D 2008/2009 Drive system W 02-04-01 Removing the main bearing z Insert thrust pad (1) in bearing bush. z Insert threaded rod (2). z Insert counter support (3). z Mount washers and screw on nuts. 1 6 3 2 © 41060-1 z Turn the nut (1) clockwise. The bearing bush is pressed onto the crankcase by the thrust pad. 1 z Dismantle assembly tool. z Remove bearing bush. © 41061-1 z Clamp main bearing housing in the vice. Use cushioned jaws. 2 z Insert threaded rod (2). z Insert thrust pad (1) in bearing bush. 1 z Insert counter support (3). z Mount washers and screw on nuts. 3 z Turn nut (4) clockwise. The bearing bush is pressed onto the main bearing housing by the thrust pad.
4 © 41057-2 © 02/2006 6001-001 4/10