D 2008/2009 Engine control W 04-04-09 z Remove screws. z Remove gearcase cover. Attention! Do not damage the sealing surfaces. z Clean sealing surfaces. z Visually inspect sealing surfaces (arrows). 6 © 41053-0 Installing the gearcase cover z Knock out crankshaft sealing ring (1). Attention! Do not damage sealing surface when knocking out. 1 z Clean sealing surfaces. © 41054-1 z Fix the new gasket to the crankcase with a little grease. Note installation position! Make sure the clamping bushings (1) are in place. 1 1 © 41056-0 © 02/2006 6007-001 2/4