D 2008/2009 Exhaust system / Charging W 06-07-03 Removing and installing the intake manifold Commercial available tools Attention! Ensure utmost cleanliness when working on the fuel system. Carefully clean the area around the affec- ted parts. Blow damp areas dry with com- pressed air. Observe the safety regulations and natio- nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps. Do not remove plugs/caps until immedia- tely before assembling. Collect leaking operating fluids in suitable vessels and dispose of according to regu- lations. – Fitting compound DEUTZ S1 6 Removing the intake manifold z Loosen pipe clip.
z Unscrew union nuts of the high pressure pipes. z Remove all injection pipes. © 41087-0 z Loosen hose clip (1). z Unscrew screws (2). z Remove intake manifold (3). z Remove gasket (4). 5 z Unscrew fuel line (5). 1 4 2 3 © 41088-0 © 02/2006 6010-001 1/2