OM6008 02/03 Optional Equipment - Section 6 Payload Meter III Page 6-27 . Reserved 1-5, 7-10: These values are internal calculations used in the continued development of PLMIII and should be ignored. Reserved 6: This value is the payload estimate at the shovel just before the truck begins to move. Two sets of data are exported. At the top of the file will be the haul cycle data. The columns, left to right are:
Truck number Haul cycle start date Haul cycle start time Payload Swingloads Operator ID Warning Flags Carry Back Total Haul Cycle time Empty Running Time Empty stop time Loading time Loaded running time Loaded stopped time Dumping time Loading start time Dumping start time Loaded haul distance Empty haul distance Loaded maximum speed Time when loaded maximum speed occurred Empty maximum speed Time when loaded maximum speed occurred Maximum + frame torque Time when the maximum + frame torque occurred Maximum - frame torque Time when the maximum - frame torque occurred Maximum sprung weight calculation Time when the maximum sprung weight calculation occurred Left Front Tire-kilometer-hour Right Front Tire-kilometer-hour Average Rear Tire-kilometer-hour Frame serial number The second series of data below the haul cycle data is the alarms.
The alarm columns, left to right are: The alarm type The date the alarm was set The time the alarm was set Alarm description The date the alarm was cleared The time the alarm was cleared Compressed This export function allows the data from one laptop to be transferred to another computer. This can be useful when a service laptop is used to download multiple machines and transfer the data to a central computer for analysis. This can also be used to copy haul data from a particular truck onto a diskette for analysis. The file format is a compressed binary form of the displayed query. The file can only be imported by another computer running the PDM Software.