Notice High beam warning Turn signal lamp In wet or cold weather conditions, or when the vehicle is exposed to rain or after washing the car, the inner surface of the lampshade may appear tiny water drops, water mist, white fog or frost phenomenon: ●This situation is due to the condensation of water vapor in the high temperature air in the lamp when it is cold, which does not affect the normal use of the vehicle.
●When the vehicle is parked in a dry environment, turn off the engine, turn on the water vapor of the lamp will gradually evaporate, and the fog on the inner surface of the lamp shade will dissipate, or there may be residues only in the non functional areas such as the corner of the lamp. ●This phenomenon will not affect the service life and lighting effect of the vehicle lighting device. You do not need to replace the lamp assembly. Pull the light control lever towards the steering wheel plane, and the high beam light will be on. When released, the light control lever will spring back automatically, and the high beam light will go out to warn the vehicles and pedestrians ahead.
Move the light control lever all the way down, the external left turn light and the left turn indicator light in the instrument cluster flash, accompanied by a tick. Move the light control lever up all the way, and the right turn indicator light in the external right turn indicator light and the instrument cluster will flash, accompanied by a tick prompt sound. When the steering is completed, the control lever will automatically return to its position with the steering wheel returning to the normal position, and the external steering light and the steering indicator light in the instrument cluster will go out. 94