Auxiliary lighting for curve * Backlight brightness adjustment Hazard light switch In the driving process, when the headlamp is on, and the driver turns the steering wheel to turn or turns on the steering lamp (reaching a certain angle), the front fog lamp on the corresponding side will be on to help the driving vehicle illuminate the blind area of the curve road. When the steering wheel is back to normal or the steering lamp is turned off, the auxiliary lamp on the corresponding side will be off. is located on the panel. When the position light is on, the backlight of each key of the instrument and the vehicle is on.
When the backlight brightness adjustment button is pushed up, the backlight brightness of the instrument backlight and the buttons of the vehicle increases; when the backlight adjustment button is pushed down, the backlight brightness of the instrument backlight and the buttons of the vehicle decreases. The backlight brightness is 10 levels in total. When the backlight is adjusted, the current backlight brightness level will be displayed on the instrument cluster. The backlight brightness adjusting knob The hazard switch is located on the multimedia control panel. In case of emergency, use hazard warning lights to remind other road users of their attention to avoid causing traffic accidents.
Turn on the hazard warning lights when: 1. When the vehicle breaks down due to technical failure. 97 multifunction switch panel on the lower left side of th