Rain / light sensor* Windshield washing Interior rearview mirror Manual anti glare interior rearview mirror * Before driving the vehicle, adjust the interior rearview mirror to obtain the best angle of view, and keep the interior rearview mirror clean. The rain / light sensor is located on the windshield near the inside rearview mirror. If the sensor is covered by mud, oil, dust, etc., the function of wiper "auto" and headlight automatic lighting may not work normally. When the start / stop button is in the "run" mode, move the wiper control lever towards the steering wheel, the washing motor will start to work, and the front windshield washing nozzle will spray water.
Release it to stop spraying water, and the front wiper will stop automatically after several times of continuous brushing. Move the wiper control lever towards the steering wheel and hold it, the washer will spray water continuously for up to 12 seconds, and then it will stop automatically. At night, move the paddle on the mirror base to the anti glare position. By adjusting the Interior rearview mirror, the glare caused by the rear vehicle light to the eyes can be reduced. 103