Caution Caution Seat belt height adjustment ●When wearing the seat belt, it should not be pressed against fragile or sharp things (such as glasses, pens, etc.), otherwise the passengers may be injured. ●Make sure that the buckle socket is not stuck by other things, otherwise the lock cannot be inserted into the buckle ●The locking of the seat belt must be correctly inserted into the buckle. Wrong wearing of the seat belt will affect the protection of the seat belt. ●Seat belts must be kept clean at all times, and heavily soiled seat belts may cause the retractor rolling not smooth.
the belt webbing is broken or cracked, the fixing bolts are loose, and the retractor malfunctions, the seat belt will not provide protection in the event of an accident. You should regularly check all parts of the seat the event of a serious crash, the used seat belt or the stretched seat belt should be replaced at BAIC Service Center. Even if there is no obvious deformation in the appearance, it needs to be replaced. Also check the seat belt fixtures. It is strictly forbidden to repair, disassemble and install the parts on the retractor or the seat belt. It is strictly forbidden to modify the seat belt in any way. Please repair the seat belt parts at BAIC service center.
Use the seat belt height adjustment device to adjust the height of the fulcrum on the seat belt to accommodate the shoulder height of different driver and passenger. 1.Hold the lower end of the regulator guide block 1. 2.Press the upper end lock button of the guide block and hold it. 3.Move the guide block up and down to adjust the seat belt to the proper position. 4.Loosen the regulator guide block. https://www.allcarpdfmanuals.com 8