MOD Moving object detection * Note When the vehicle is stop, AVM can recognize the moving object in the camera image. When the system detects the moving object in the image, the system will give the corresponding prompt to remind the driver that there is a moving object around the vehicle and drive cautiousness ●this function is only helpful for safety drive, but not belong to the vehicle driving safety system. It only plays an auxiliary role and cannot instead the driver's control. ●when the camera is covered by rain, snow, mud, ice and snow, the function will show false alarm or missing alarm, please drive carefully.
the night, rain, snow, fog, shadow, etc., this function may produce false alarm and missing alarm, please drive carefully. Function switch Click the "MOD" switch on the left side on the AVM system interface to turn the MOD function on and off. When the system detects a moving object, a triangle is displayed in the corresponding area of the panoramic image as a reminder ●the smallest object that the system can detect is about 50cm*50cm; ●The system can only detect objects within 3.5 meters in fron and rear of the body and about 2 meters in left and right side, excluding the blind area of the camera. 168