The function will be turned on again and indicator light Press the start/stop switch again working condition operation method will be off. When function is on, if there is a fault in the system, the idling start-stop/fault indicator light on the combination instrument 1. The function is in the open state, and the relevant parts are no fault (such as sensors, relays, etc.); 2. The battery sensor detects enough energy to start the next time; 3. The coolant temperature reaches above 60 ; 4. Sufficient vacuum of brake vacuum booster; 5. Engine hood is closed; 6. The driver's side door is closed and the main driving seat belt is fastened; 7. Air conditioning or mist function is off; 8.
The acceleration pedal is completely released; 9. The vehicle is relatively stationary (the speed is less than 3km/h); 10. The vehicle had a start of more than 10km/h. After the vehicle meets the working conditions: For CVT transmission models: the gear position is put in "D" gear, and the brake pedal is pressed down and maintained. After the vehicle stops steadily, the engine will automatically turn off.When ready to start again, just release the brake pedal to start the engine automatically. For manual transmission models: gear position in neutral and release the clutch pedal, the engine will automatically turn off;When ready to start again, just press the clutch pedal to start the engine.
will stay on after flashing for a period of time, and the system cannot realize the idling start-stop function. warning ●When the engine starts automatically, if the driver does not shift gear or press the accelerator within 15 seconds, the engine will stop automatically again. 174