Tire and brake pads run-in Danger Driving essentials in different situation For the first 500km, drive at moderate speed to run in tire well If the new brake pads and brake disc do not reach the optimal friction state within the initial 500km, emergency braking should be avoided and sufficient safety braking distance should be maintained to gently press on the brakes to achieve the optimal run-in state ●None run-in tires and brake pads do not have the best adhesion and friction, so the first 500km must be driven carefully to avoid accidents. New brake pads must also be in accordance with the above requirements.
●when driving, should keep a proper distance from other vehicles, beware of the need for emergency braking.Because right now new brake pads did not run in that is easy to cause traffic accidents. In the manual mode of CVT, when the vehicle is driving on a severe bumpy road or emergency braking, the vehicle may temporarily exit the manual mode to protect the transmission. At this time, the gear position display D. When the vehicle resumes normal driving, the manual mode M will be automatically restored.
CVT vehicle in extreme uphill condition (stop to uphill 32%,uphill 33%), clutch will be in long term (or short time repeatedly) slip friction condition which cause the clutch temperatures soared to limit the transmission alarm, even transmission will enter self- protect mode to cut off the power until the oil temperature decreases. 178