Safety instructions for working in engine compartment Danger Danger General instruction ●Before opening the engine hood, if steam or coolant overflow from engine compartment, do not open the engine cover, beware of scald! Waiting for engine cooling, until can not see steam or coolant overflow ●Do not operate in the engine compartment when overheating, such as inspection and addition of oil, so as to avoid injury and scald operators, or even cause a fire. not touch the cooling fan. The cooling fan is controlled by temperature and may turn on automatically when the engine is out. ●Check your vehicle for oil leakage. Avoid dripping oil onto a hot engine or exhaust, which can be a fire hazard.
●When adding oil, do not mix up all kinds of oil, otherwise it will cause serious functional failure of the vehicle. under the car operation, should take appropriate measures to prevent the car slip or with the appropriate support vehicle. In this case, it is not suitable to support the vehicle with the jack assembly only, beware of causing injury to the operator under the car! you have to start or run the engine operation, be careful at all times, beware of accessories such as belts, generators, cooling fans and other rotating parts and high-pressure ignition system injury operators!
The engine compartment is a dangerous area.If you are not familiar with necessary operations and general safety precautions, do not work in the engine compartment without proper tools!Please transfer all operations to dealership.Improper work can lead to injury. Before all operations in the engine compartment, the following operations shall be performed: 1. Park the vehicle in a safe area, on a flat, load-bearing surface. 2. Apply parking brake, put the gear in "P" or neutral, close the engine and wait for the engine to cool down. 3. Keep children away from the vehicle. 4. Open engine hood . 5. Please make sure the car doesn't slip by accident. 193