Oil level checking method add engine oil check the level by oil dipstick: 1. Park on flat and solid ground. 2. Start the engine and warm it up until the engine temperature reaches the normal operating temperature (about 5 minutes). 3. Turn off the engine and wait for at least 10 minutes to let the engine oil flow back into the oil pan. 4. Pull out the oil dipstick, wipe off the oil with a clean cloth, and re-insert the oil dipstick to the bottom. 5. Pull out the oil dipstick again and check whether the liquid level is between the upper and lower marks.
A upper limit B lower limit Engine operation will consume a certain amount of oil, oil consumption depends on the driving mode and vehicle use conditions.Therefore, it is necessary to check the oil level regularly, and it is best to check the oil level after each refueling and before long distance driving. When long distance driving in summer or driving in mountain zone, in this harsh conditions, the oil level should not exceed the upper mark A . 1. Park on a flat, solid surface. 2. Open engine hood. 3. Remove engine trim cover. 4. Put a cloth around the filling port to prevent oil from dripping onto the engine. 5. Turn counterclockwise to open the oil filling cap. 6.
In order to avoid excessive oil filling, oil added should little by little in several times 197