Tire pressure inspection with pressure Caution You can check tire pressure with a tire gauge when the tire is cold. ●After traveling for some time, the pressure in the tire should rise by 0.2 0.5bar. You check the tire pressure at this time. Never deflate tires in order to make measured tire pressure meet the standards. Otherwise, the tire pressure in cold state will be lower than the standard value. the vehicle travels at high speed when the tire pressure is obviously insufficient, the tire will deform continuously, which can easily lead to overheating and tire burst. Danger 2. Place the tire pressure gauge against the valve with force, and the gauge will show the tire pressure. 3.
Check and adjust the tire pressure until it meets the standard value. See "Tire Information for standard tire pressure sign. After the inspection is completed, be sure to mount the valve cap onto the valve inside. Valve cap can prevent dust and moisture from entering into the tire valve. 1. Remove the valve cap from the tire valve, and check the tire valve with soap method for leakage. Caution ●You may add domestic detergent into fresh water, apply the solution to the valve inside, and observe whether there is any bubble generated. If there is bubble generated, it means that the air leaks. 210