The driving time is the cumulative time of driving after refueling. The start / stop button starts timing when it is in "run" mode. The maximum value displayed is 99:59. Average vehicle speed is the value of driving distance divided by driving time in driving time. Reset mode: 1. It is detected that the change of oil quantity is greater than 6L (it shall be ensured that the oil quantity is greater than 6L at one time); 2. The subtotal mileage reaches the maximum of 9999.9km; 3. Disconnect the battery. When clearing, the subtotal mileage / average fuel consumption will be cleared at the same time.
Fuel consumption Endurance Mileage The fuel consumption interface displays three kinds of information: average fuel consumption, instantaneous fuel consumption and endurance mileage. The average fuel consumption shows the fuel consumption per unit mileage of the vehicle, in L / 100km. The average fuel consumption value displayed from the last reset to the time of view. Instantaneous fuel consumption indicates the magnitude of transient fuel consumption, which can help users adjust driving habits to achieve the desired fuel consumption. The driving time is the accumulated time of this driving. The start / stop button starts timing when it is in "run" mode.
The maximum value displayed is 99:59. Reset mode: 1. In the display interface, short press the confirm key to enter the reset page, or long press the confirm key to clear directly; 2. Disconnect the battery. The distance you can drive can be estimated and displayed based on the current driving mode and the fuel quantity in the tank. If you drive your car in a more economical way or in a better road condition, this effective distance may be further increased. 46