lights flash, reminding the vehicle does not enter into the alarm state, you should check whether the engine hood and trunk lid are closed reliably. If so, but you still cannot activate the alarm, please go to the authorized dealer of BAIC for repair, in order to avoid property loss due to alarm fault. Triggering conditions of the alarm status: you lock doors with the smart key, all doors locked, but engine hood or trunk lid unlock, the vehicles prompt alarm. you lock doors with the smart key, any door( include hood and trunk lid) open, the vehicles prompt alarm. lock doors with the smart key, unlock and open door with mechanical key, the vehicles prompt alarm.
Phenomenon triggered the alarm status ●All turn signal lamps flash simultaneously and the horn beeps. Methods to release the anti-theft alarm status after triggering: ●Press the unlock button on the smart key or the remote control key to release anti-theft alarm, lights and sound signal are stopped, and the vehicle is unlocked. ●The alarm state can also be release after the vehicle engine is started . Oil system automatic cutting system When (collision) traffic accident, the ECU receives the vehicle collision signal will immediately turn off the fuel pump relay, to stop the vehicle gas supply, prevent danger happen. Note ●Only lock with the smart key , the vehicle is in fortification state.
77