11. EXPLANATION OF COMPONENTS 2. ENGINE WATER TEMPERATURE GAUGE This gauge indicates the cooling water temperature. When the indicator is in the white range during operation, the water temperature is normal. If the indicator moves from the white range into the red range during operation, stop the machine immediately, run the engine under no load at a midrange speed, and wait for the indicator to go down to the white range. After starting the engine, warm up it until the indicator moves into the white range. White Red AD051614 NOTICE If the water temperature gauge often enters the red range, check the radiator for clogging. 3.
TRANSMISSION OIL TEMPERATURE GAUGE This indicates the temperature of the transmission lubricating oil. When the indicator is in the white range during operation, the oil temperature is normal. If the indicator moves from the white range into the red range during operation, stop the machine, run the engine under no load at a midrange speed, and wait for the indicator to go down to the white range. White Red AD051615 NOTICE If the Transmission oil temperature gauge often enters the red range, we recommend you to lower the travel speed one range (for example, F2 F1) to reduce the load on the power train when operating. 4.
FUEL GAUGE When the starting switch is turned ON, this displays the amount of fuel remaining in the fuel tank. F indicates a full tank. When the indicator points to E, it indicates that there is less than 150 ¬ (39.63 US gal) remaining, so add fuel. Always fill the tank after finishing operations. AD051616 5. ENGINE WATER TEMPERATURE CAUTION LAMP This warns of a rise in the temperature of the engine cooling water. If the lamp lights up, stop the machine, run the engine under no load at a midrange speed, and wait for the indicator of the engine water temperature gauge to go down to the white range. AD051617 2-5