11. EXPLANATION OF COMPONENTS DUAL TILT OPERATION C + A : Left dual tilt (keep button C pressed and operate in direction A .) C + A : Right tilt (keep button C pressed and operate in direction B .) If the tilt operation is carried out with button C at the top center of the knob kept pressed, a larger tilting force can be obtained than in normal tilt operations. PITCH OPERATION D + A : Rear pitch: Smaller cutting edge angle (keep button D pressed and operate in direction A .) D + B : Forward pitch:
Larger cutting edge angle (keep button D pressed and operate in direction B .) Return the lever to the neutral position, then keep button D at the front center of the knob pressed, and operate the tilt to change the angle of the cutting edging of the blade. PRECAUTIONS WHEN USING DUAL TILT, PITCH If the tilt operation is carried out with buttons C and B both pressed at the same time, the blade will be pitched. (The pitch operation is the priority circuit.) To make effect use of the dual tiltdozer, see OPTIONS, ATTACH- MENTS. REMARK For the dual tilt and pitch operations, keep the button pressed and move the lever to the left or right to start the actuation.
The pitch operation is the priority circuit, so if both buttons are pressed at the same time, the pitch will be operated. 2-18