11. EXPLANATION OF COMPONENTS 11.15 REVERSING REVERSIBLE FAN When reversing the reversible fan in cold weather, do as follows. 1. Loosen bolt 2 , then remove cover 1 on the right side of the radiator guard. A hole for inserting the tool can be seen. 2. Open engine side cover 3 on the right side of the machine so that the reversing operation can be seen. 3. Insert the tip of the tool into fan blade 4 . 4. Push towards the center of the fan, and turn the handle of the tool to reverse the fan blades. 5. Reverse 8 fan blades, but rotate the fan as follows. Use the starting motor to rotate the fan.
Loosen the nut of the spring which applies tension to the tension pulley, reduce the belt tension, and rotate by hand. Do not loosen the nut too far or remove it. After completely reversing all the fan blades, tighten the nut to its original position. REMARKS When inserting the tool, if the work equipment or any other part is in the way, change the position of bolt 5 to extend the tool when using it. If the fan is used in the suction direction in temperature below –30°C, it has the effect of heating or maintaining the battery temperature. Use part number 175-900-3910 for the tool.
If winter fuel is not available, to prevent clogging of the fuel due to precipitation of the paraffin, we recommend use of the fan in the suction position at temperatures below –15°C. 2-30