. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS bucket horizontally until the bottom touches the engine oil pressure, and 3 - 115 2. Turn fuel control dial (2 ) to low er the e ngine s peed to low idle. 3. Lower th ground. 4. Set lock lever (3) in the LOCK position CHECK AFTER SHUT OFF ENGIN Check the e fuel level on ngine coolant the machine m REMARK After stoppin g the engine, if the starting switch is turned within approx. 10 seconds to th e ON o r STAR T position t o start the engine agai before the st n, the monitor arting switch w display as turn is not ed OFF reset, and t is displayed he screen . MACHINE INSPECTION AFTER DAILY WOR K 1. 2. 3. 4. 1.
Walk aro und the machi ne and check t he work equipment , machine exterior, and under carriage, also check for any leak age of oi l or co olant. If any pr oblems are fo und, r epair 2. Fill the fu el tank. 3. Check th e engine compartmen t for pa per and debr is. Clean ou t any paper and debris 4. Remove any mud affix ed to the undercarriag