. OPERATION TRANSPORTATION OPERATION TRANSPORTATION When the swing lock switch is turned ON, display monitor (3) lights up. 3 - 119 6. If the machi ne is equipped with w ork equipment, s et the work equipment at the front, and travel forward to load it; if it has no work equip ment, travel in reverse Follow instr uctions and signals when travel 7. Before mov ing onto the ramps, m ake sure that the machine is positioned in a straight line wi th the ramps an d that the r. el slowly. he centerline o f the machine matche s that of the traile Align the dir ection of travel with t he ramps and trav el slowly Lower the w ork equipment as far as possible witho ut causing interference .
he ramps, operate only the travel lever. Do not other lever. When on t operate any 8. When the m achine travels over th e rear wheels of t he trailer , it becomes u the steering nstable, drive slowly and carefully. (Never operate .) 9. At the mom ent the machine passes the rear wheels, it tilts forward, be careful not to let the work equipment hi t the trailer body. Drive the machine forward t o the specified po sition, then stop the ma chine. 10. Turn the sw ing lock switch OFF to release the swin g lock, then swing the u pper structure slowly 180°. d position on the trailer. 11. Stop the ma chine at the specifie d position on the tr 12. Turn the sw ing lock switch ON to lock the swing lo