. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN SWING MACHINERY CASE WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil 4 - 65 temperature to go d own before performing this operation Refill capacity: 6.6 liters (1.74 1. Set a contain er under drain v alve (P) under the machi ne body to catch the o 2. Loosen drain tighten the dr ain valve again. 3. Remove the gauge of oil fi amount of en gine oil through 4. Pull out dipsti ck (G) and wipe off oil o n the dipstick wit h cloth. 5. Fully insert di pstick (G) into f iller pipe (F), then remove 6.
When the oil level is betwee n the H a nd L marks, on dipstick (G), it is norm al. If the oil doe s not rea ch the L m ark, ad d more oil through oil 7. If the oil is ab ove the H mark, drain th e excess engine oil from drain valve (P ), and check th e oil leve l again. When drai ning the excess engine o il, pull ou t hose ( 1) from hole and then o pen the d rain valv