. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENT OPERATIONS WARNING Operate the attachment as follows. When 6 - 20 Do not rest t he foot on the pedal and depres s it, when the auto deceleration switch is in ON posi tion. The engine speed rises all of sudde n and the attachment will move s uddenly and cause seriou s damage or injury. Do not put y our foot on the pedal except wh en operating the pedal. If r est your foot is the peda l during operations, an d it is depressed b y accident, the attachment may move suddenly and cause serious damage or injury .
When Using Breaker mode control switch is ON and the lock pin position When the B makes only t he front of the pedal free, if t e breaker is actuated. orking mode to B mode. he front of the pedal is is pressed, the screen depressed, th 1. Set the w 2. When sel changes t from amo then pres 3. The moni to make fi to move t press inp It is po 10 liter If fine confirm The de Even i when t above 1. Set the w 2. When sel ect switch (1) on the monitor o screen (A). Select a suitabl e oil flow for the breaker ng 180 liters/min, 140 liters/ min, and 100 liters/min, ). s input confirmation switch (2 3.
The moni tor screen changes to screen (B), so if it is necessary ne adjustment, press up switc h (3) or down switch (4) he bar graph showing the oi ut confirmation switch (2). l flow up or down, then ssible to change the oil flow in segments of approx. s/min. adjustment is not necessary, simply press-input ation switch (2). fault setting is 180 liters/min. fault setting is 180 liters/min f the starting switch is turne he engine is next started will d OFF, the set oil flow be the value set by the procedure. ns when using FREE position. mode. that the stop valve is at the that the working mode is B tails of the path of the oil, see " HYDRAULIC CIRCUIT 6-14)".
considering whether it is necessary to install an ulator for the attachment circuit, contact the ment manufacturer and then decide. ulator for the attachment ment manufacturer and then er precautions when handlin g the breaker, follow the tion manual from the breake r manufacturer and use aker correctly.