. SAFETY SAFETY INFORMATION FALLING OBJECTS, FLYING OBJECTS AND INTRUDING OBJECTS PREVENTION On jobsites where there is a hazard that falling objects, flying objects, or intruding objects may hit or enter the operator's cab, breaker operations, install a quarries where there is a hazard of (Falling Objects Protective Structure) hazard from falling or flying conditions on the jobsite. 2 - 15 Fire coming from electric wiring stem can cause fire. onnections clean and securely tightened.
Short circuits in the electrical sy Always keep electric wiring c Check the wiring every day f or replace any damaged wiri Short circuits in the electrical sy Always keep electric wiring c Check the wiring every day f or looseness or damage. Tighten any loose co nnectors or wiring clamps. Repair ng. Fire coming from hydraulic line e clamps, guards, and cushions are securely fixed in position. Check that all the hose and tub e clamps, guards, and cushions are securely f ixed in posit If they are loose, they may vibra te during operation and rub against other part s. This may l ead to damage to the hoses, and cause high-pressure oil to spurt out, leading to fire damage or ser ious injury.
Explosion caused by lighting equip ment ttery electrolyte, window washer fluid, or coolant, always use lighting with If such lighting equipment is not used, there is danger of explosion that may When checking fuel, oil, ba anti-explosion specifications. cause serious injury. When taking the electrical po When checking fuel, oil, ba When taking the electrical po wer for the lighting from the machine itself, foll ow the instru ctions in this m anual.
ACTION IF FIRE OCCURS If a fire occurs, escape from the m Turn the start switch OFF to sto Use the handrails and steps to WINDSHIELD WASHER FLUID Us e an ethyl alcohol base washer Methyl alcohol base washer liquid consider the operating conditions a to protect the operator. When carrying out demolition o front guard and use a laminated When working in mines or quar falling rock, install FOPS (Fallin and a front guard, and use a lami glass. When carrying out the above op window. In addition, always ens distance away and are not in objects.
The above recommendationsas standard operations, but it may guards according to the opera Always contact your Komatsu d standard operations, but it may guards according to the opera Always contact your Komatsu d