. SAFETY SAFETY MACHINE OPERATION SAFETY MACHINE OPERATION 2 - 19 STARTING ENGINE If t here is a warning tag hanging from the work equipment control lever, do not start the engine or touch the levers . CHECKS BEFORE STARTING EN Carry out the following checks b efore starting the engine at the b eginning of the day's w Remove all dirt from the surfa ce of the window glass to ensure a good view. Remove all dirt from the surfa and working lamps, a nd check that t hey l ight up correctly.
Check the coolant level, fuel l evel, and oil level in engine oil pan , check for clogging of the air cleaner , and check for damage to the electric wiri Adjust the operator's seat to a position where it is easy to carry o ut operations, and che ck that there is no d amage or wear to the seat belt or mo Check the operation of the in levers are all at the Neutral p Before starting the engine, m ake sure that the lock lever is in t he LOC Adjust the mirrors so that the rear of the machine can be seen clearly f rom the opera When adjusting, see "Rearvie Check that there are no perso ns or obstacles above, below, or in the a rea around th SAFETY RULES FOR STARTING When starting the engine, so Start and operate the machin Do not allow anyone apart fro m the operator to ride on the mac hine.
Do not attempt to start the en gine by short-circuiting the engine startin Such an act may cause a ser STARTING ENGINE IN COLD WE ATHER eration thoroughly. If the machine is not thoroughly warmed up before the contro Carry out the warming-up op contro levers are operated, the react ion of the machine will be slow, a nd this may lead to un expected accidents .