. SAFETY SAFETY MACHINE OPERATION OPERATION CHECKS BEFORE OPERATION When carrying out the checks, move the machine to a wide area where there are no obstructions, and operate upper structure so that the movement (for example, forward right). Be careful to avoid that there is no one in the the operator to ride on the windows of the operator's check that the door and of the machine which cannot be 2 - 21 slowly. Do not allow anyone near Always fasten your seat belt. Check that the movement of th e machine matches the display on the control pattern card.
I f it does n ot match replace it immediately with the Check the operation of the wor k equipment, traval system and swing system Check for any problem in the s ound of the machine, vibration, heat, smell, or gauges ; check also that t here is no leakage of oil or fuel. If any problem is found, carry o SAFETY RULES FOR CHANGING Before traveling, position th sprocket is at the rear of the op the front of the operator's cab, reverse to the control lever m becomes reverse, and left bec such a reverse movement of th Before travelling, check agai surrounding area, and that the Before travelling, sound the ho Always operate the machine o Do not allow anyone apart fr machine.
Check that the travel alarm (if Always lock the door and compartment in position (open On jobsites where there is a ha entering the operator's compa windows are securely closed. If there is an area to the rear seen, position a signal person. machines or people when turn Always be sure to carry out the a machine is equipped with mirrors