. OPERATION DETAILED CONTROLS AND GAUGES Monitor Switches Portion E(1) E(2) E(3) E(4) E(5) E(6) Working mode selector switch (basic switch) Auto-deceleration switch (selection switch) Travel speed selector switch Wiper switch Window washer switch Maintenance switch E(7) E(8) E(9) E(10) E(11) E(12) Select switch Back switch Up switch Down switch Input confirmation switch Adjusting brightness and contrast Working Mode Selector Switch (Basic Switch) Switch (1) is used to set the power and movement of the work equipment. Operations can easily be performed by selecting the mode to match the type of operation. A mode: For heavy-duty operations E mode:
For operations prioritizing fuel consumption L mode: For fine-control operations B mode: For breaker operations When the engine is started, the working mode is set automatically to A mode. When the switch is pressed, it is possible to select the other modes. The monitor display on the monitor display portion changes for each mode. If it is desired to have the working mode set to start automatically in E, L, or B mode (default options setting), please contact your Komatsu distributor to change the setting. 3 - 18