. OPERATION DETAILED CONTROLS AND GAUGES OPERATION DETAILED CONTROLS AND GAUGES press only when it is possible to install an 3 - 24 4. checkin input confirmation switc The s creen w ill return t o the maintena nce screen. (Pres s back switch (8) to return to the previous screen.) Select Sw itch Thi s switc h (7) is used as a selector switch when settin g th e oil flow for each working mode (A, E, B mode). When working mode is A or E and the normal screen on the monitor (1) Press select switch (7) normal on the monitor display chang es to the fl ow settin g scree n shown in the diagram on the right. (2) Press up swit ch (9) or d own switch (10) to adjust to the desired f low.
egment on the scale is approx. 30 liters/min. Each s egmen t on the sc ale is approx. 3 0 liters/min (3) After completing the flow setting, press input confirmation (11). onitor display will return to the normal screen. onfirmation switch (11). The m onitor d isplay will return to the no rmal screen REMARK The flow can be adjusted Th attachme nt. (if eq uipped) When working mode is B (1) Press select switch (7) normal on the monitor display chang es to the fl ow settin g scree n shown in the diagram on the right. (2) Press up swit ch (9) or d own switch (10) to adjust to the desired low. After (3) switch