UNDERCARRIAGE / Track Adjuster 5. Slowly return the piston of special tool (ST 4932) until spring (7) extends to the free length. CAUTION: Spring (7) weight: 104 kg (230 lb) 9. After removing eyebolt, remove spring (7) from the rod (6) assembly. 10. Remove spacer (8) from rod (6). NOTE: Spring (7) free length: 691 mm (27.2 in) CAUTION: Track adjuster weight: 200 kg (440 lb ) 6. Attach a nylon sling to spring (7) in the track adjuster. Hoist and remove the track adjuster from special tool (ST 4932). CAUTION: Holder (1) is pushed into piston rod (2). 11. Remove piston rod (2) from cylinder (5). 12. Remove holder (1) from piston rod (2) by using a press. 13. Remove rod (6) from cylinder (5).
IMPORTANT: Do not damage dust seal (3) and U-ring (4). 14. Remove dust seal (3) and U-ring (4) from cylinder (5). W142-03-04-005 7. Remove washer (9) from rod (6). CAUTION: The spring (7) assembly weight: 183 kg (405 lb) 8. Install eyebolt (M16, Pitch 1.5 mm) to rod (6). Hoist and remove the spring (7) assembly from special tool (ST 4932). W3-4-5 ST 4932 9 7