UNDERCARRIAGE / Front Idler Disassemble Front Idler CAUTION: Yoke (9) weight: 25 kg (55 lb) 1. Attach a nylon sling to yoke (9) and hold yoke (9). Remove bolts (10) (4 used). Hoist and remove yoke (9). CAUTION: The axle (5) assembly weight: 32 kg (71 lb) 4. Put the matching marks on bearing (1) and axle (5). Remove the axle (5) assembly from the idler (7) assembly by using a press. : 24 mm CAUTION: The idler (7) assembly weight: 162 kg (357 lb) 2. Place the idler (7) assembly horizontally. Remove plug (8) from the lower side. Drain oil from the idler (7) assembly. : 6 mm 3. Remove pin (2) from bearing (1) by using a bar and hammer. W105-03-05-008 5.
Remove bearing (1) from the upper side of idler (7). Remove floating seals (3) (2 used) from both sides of idler (7) and bearing (1). W105-03-05-009 W3-5-3 1 5 7 1 3 3 4 5 1 7