FRONT ATTACHMENT / Cylinder 5. Remove bucket cylinder hoses (12) (2 used) at the bottom of bucket cylinder (1). Cap the open ends. : 41 mm 10 CAUTION: Bucket cylinder (1) weight: 250 kg (550 lb) 15 CAUTION: Metal fragments may fly off when a hammer is used. Wear necessary protection, such as goggles, hard hats, etc in order to prevent personal injury. 6. Attach a nylon sling onto bucket cylinder (1) and hold bucket cylinder (1). Remove nuts (13) (2 used) and bolt (15). Remove pin (11). Remove thrust plate (10). 13 11 1 : 30 mm 7. Hoist and remove bucket cylinder (1). W187-04-02-004 12 W4-2-3