FRONT ATTACHMENT / Cylinder 6. Remove all hoses and lubrication pipes from positioning cylinder (3). Cap the open ends. : 19 mm, 41 mm 7. Remove bolt (8) and plate (9) from pin (10). 3 : 27 mm CAUTION: Metal fragments may fly off when a hammer is used. Wear necessary protection, such as goggles, hard hats, etc in order to prevent personal injury. 8. Remove pin (10) from first boom (1). Remove thrust plate (11). 9. Hoist and remove positioning cylinder (3) from first boom (1). B 1 W1V1-04-02-017 Section B 3 10 9 8 W1V1-04-02-018 11 W4-2-15